Milltronics CVCC Bedienerhandbuch PDF herunterladen (Seite 21)

APPLICATIONS

The following examples illustrate the most common applications to which the BIC-II may be applied. Refer to

the example which best resembles the intended BIC-II application.

SINGLE BIC-II - EXAMPLE

An IBM compatible computer is to display the material inventory on hand, contained in 8 vessels monitored by

a Milltronics level measurement product (e.g. AiRanger XPL).

Refer to Figures for BIC-II general mounting and interconnection instructions.

The AiRanger XPL should be mounted as close and central as possible to the 8 vessels to minimize the

amount of cabling required. Refer to the AiRanger XPL instruction manual.

The ASCII output from the AiRanger XPL should be connected to BIC-II \ PORT1. The RS-232 port of the

BIC-II must be connected to the computer’s communication port, (it must be COM1 if using the BIC-II test disk)

Apply power to all devices. Run the communication test program on the BIC-II Test Disk (refer to Appendices

\ BIC-II Test Disk). Install the computer communication software and perform the software and display system

set up as described in the instruction manual included with the software package.

AiRanger XPL

PL-371 6 – 1

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 75 76

Keine Kommentare

Milltronics CVCC Bedienerhandbuch Seite 21