Milltronics CVCC Bedienerhandbuch PDF herunterladen (Seite 48)

MAINTENANCE AND SPARE PARTS

MAINTENANCE

The CompuScale III requires no maintenance. However, a program of periodic preventative maintenance

should be initiated. This should include regular inspection, general cleaning and good housekeeping practices.

Enclosures and printed circuit boards should be cleaned only when the power is disconnected at the main

breaker. The use of a vacuum cleaner to remove foreign material dislodged with a clean dry paint brush is

recommended. Check all electrical connections for signs of corrosion and/or electrical arcing.

The CompuScale III memory backup and calibrator batteries should be replaced annually. The 3.6 Volt lithium

battery (located on the mother board top right corner) should only be replaced while the CompuScale III power

is ON. The 9 Volt calibrator battery is located on the back of the CompuScale III door.

SPARE PARTS

The following list describes the CompuScale III components which may be ordered as a spare part. The ITEM

# refers to the number which should be included on the purchase order to identify the part required.

DESCRIPTION ITEM #

Battery, Lithium, 3.6 V, AA, (Memory) 20200031

Battery, Alkaline, 9 Volt, (Calibrator) 20200025

Enclosure Bottom Plate 24650116

Fuse, 0.25A, 250V, Slo-Blo, CSA, (Speed Sensor) 22550070

Fuse, 0.75A, 250V, Slo-Blo, CSA, (Main) 22550112

For other spare part ordering information, contact Milltronics or your distributor.

Pl-367 11 – 2

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 58 59

Keine Kommentare

Milltronics CVCC Bedienerhandbuch Seite 48