Milltronics XRS-5C Bedienerhandbuch

33455900Rev. 1.1XRS-5 TRANSDUCERXRS-5 TRANSDUCERInstruction Manual PL-590 January 2001

Page 10 XRS-5 Transducer PL-590 Installation

PL-590 XRS-5 Transducer Page 11 Mounting Mounting Recommendations • Mount the transducer so that it is above the maximum material level by more th

Page 12 XRS-5 Transducer PL-590 Mounting Blind Flange Face Flange Note: Tighten the flange bolts evenly in order to ensure a good seal betwee

PL-590 XRS-5 Transducer Page 13 Applications Applications Notes: • The transducer is to be used only in the manner outlined in this instruction ma

Page 14 XRS-5 Transducer PL-590 Applications Standpipes and Stilling Wells In many applications, access must be made via a standpipe. In such cases

PL-590 XRS-5 Transducer Page 15 Applications Water / Wastewater Differential Level Pump Control Sewage Lift

Page 16 XRS-5 Transducer PL-590 Applications Transducer Placement The following graphic shows the best placement of the XRS-5 transducer. Location

PL-590 XRS-5 Transducer Page 17 Applications Notes 1. Beam should not detect bin bottom. If this occurs, use range extension parameters (on transc

Page 18 XRS-5 Transducer PL-590 Applications

PL-590 XRS-5 Transducer Page 19InterconnectionInterconnection Note:Installation shall only be performed by qualified personnel and inaccordance wit

© Siemens Milltronics Process Instruments Inc. 2001Safety GuidelinesWarning notices must be observed to ensure personal safety as well as that of oth

Page 20 XRS-5 Transducer PL-590 Interconnection Coaxial Connection Connect the transducer to the Milltronics transceiver via a junction box and RG–

PL-590 XRS-5 Transducer Page 21 Installation Diagram Installation Diagram

Page 22 XRS-5 Transducer PL-590 Installation Diagram

Siemens Milltronics Process Instruments Inc.1954Technology Drive, P.O. Box 4225Peterborough, ON.Canada K9J 7B1Tel: (705) 745-2431 Fax: (705) 741-0466w

PL-590 XRS-5 Transducer Page 3 Table of Contents Specifications ...

Page 4 XRS-5 Transducer PL-590

PL-590 XRS-5 Transducer Page 5SpecificationsSpecifications Process Application:{liquids and slurries{Measurement Range{0.3 to 8m (1 to 26 ft) typic

Page 6 XRS-5 Transducer PL-590 Specifications

PL-590 XRS-5 Transducer Page 7 About this … About the Transducer The Echomax XRS-5 transducer works with Milltronics transceivers and provides the

Page 8 XRS-5 Transducer PL-590 About this … General Guidelines The equipment may be used in all hazardous zones with all gases with temperature cla

PL-590 XRS-5 Transducer Page 9 Installation Installation Outline and Dimensions Standard Flange (optional) Submergence Shield Split Flange (o