Milltronics PL-551 Technical Information PDF herunterladen (Seite 289)

100

101

SECTION FOUR - PREPARATORY FUNCTIONS (G CODES)

High speed peck drilling cycle (G73)

G73 G98/G99 Z___ R___ V___ Q___ U___ D___ F___

The G73 command specifies the high speed peck cycle. This cycle will do the following.

1. Rapids to point R

2. Feeds down to point V

3. Rapids up U value

4. Rapids down to D value

5. Feeds down by Q value or Z point (whichever is less)

6. Repeat steps 3-5 until point Z is reached

7. Rapids to initial point/point R as determined by G98/G99

Note: The V command is optional. If left out, the first depth would equal R___ - Q___.

275

1 2 ... 284 285 286 287 288 289 290 291 292 293 294 ... 440 441

Kommentare zu diesen Handbüchern

Keine Kommentare

Milltronics PL-551 Technical Information Seite 289

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Milltronics PL-551